Skip to content

Starlink Wall Mount Installation

A wall mount attaches your Starlink dish directly to the house wall for a clean secure installation. This guide covers wall mount types, UK wall type fixings, height positioning, and cable routing.

The official Starlink wall mount costs £49 from the Starlink shop. It is a fixed metal bracket holding the dish approximately 150mm from the wall. The mount includes a wall plate, arm, and dish pipe adapter. The mount attaches at a fixed angle so the dish tilt is determined by the wall orientation. For best reception mount on a north-facing wall. If mounting on a south or east wall the tilt angle may be insufficient -- consider a pivot mount instead. The wall mount fits both Gen 3 and Mini dishes using the appropriate pipe adapter. Third-party wall mounts from Pole Mount UK (£35-£55) offer adjustable angles. Wall mount positioning: the dish needs clear sky view above 30 degrees elevation. Mount as high as possible -- typically just below the gutter line at first floor level. For UK bungalows mount at the gable end wall for best satellite reception.

Step 1: Choose the optimal wall position. North-facing wall is best. Use the Starlink app obstruction check to confirm clear view. Step 2: Mark bracket position at chosen height (2.5-4m above ground is typical). Step 3: For brick walls use an SDS drill with 8mm or 10mm masonry bit depending on kit fixings. Step 4: Drill holes to 50-60mm depth into brick. For cavity walls ensure fixings go into the brick outer leaf only. Step 5: Insert wall plugs or expanding anchors. Use Fischer UX 10x50mm wall plugs with M8 coach screws for brick. Step 6: Attach the wall plate tightening all bolts to specification. Step 7: Attach the arm and pipe adapter. Step 8: Route the dish cable along the wall using exterior-rated cable clips. Step 9: Drill a cable entry hole through the wall at a slight downward angle to prevent water ingress. Use a cable gland to seal. Step 10: Attach the dish to the pipe adapter and tighten. Step 11: Connect the cable inside the house to the Starlink router. Step 12: Check signal strength on the Starlink app. Step 13: Apply exterior silicone sealant around all wall penetrations. Prices: official wall mount £49, third-party adjustable mount £35-£55, cable entry gland £8, professional installation £100-£200.

Specifications and Comparison

Wall Mount Type Material Fits Starlink Price UK Source
Official Starlink wall mount Powder-coated steel Gen 3, Mini £49 Starlink shop
Pole Mount UK adjustable wall mount Galvanised steel All models £45 Pole Mount UK
Universal wall bracket Aluminium All with adapter £35-£55 Amazon UK
Low-profile wall mount Stainless steel Mini only £40 Custom fabricators
Gable end wall bracket Galvanised steel All models £50-£70 Pole Mount UK

FAQ

What is the best wall for a Starlink wall mount in the UK?
North-facing walls provide the best satellite reception. South-facing walls need a pivot or articulating mount to tilt the dish northward. East and west walls may work but with reduced coverage.
Can I install a Starlink wall mount on a UK brick wall?
Yes, brick walls are ideal. Use Fischer UX 10x50mm wall plugs with M8 coach screws or M8 expanding anchors for secure attachment. Drill to 50-60mm depth into solid brick.
What height should a Starlink wall mount be installed?
Mount at least 2.5m above ground to clear garden obstructions. First floor level (3-4m) is ideal. The dish must have a clear sky view above 30 degrees elevation from its position.
How do I route the Starlink cable from the wall mount?
Run the cable along the wall using exterior-rated cable clips. Drill through the wall at a slight downward angle using a cable gland to seal the entry. Route inside to the router location.
Does the Starlink wall mount work on cavity walls?
Yes but fixings must only penetrate the outer brick leaf (approximately 100mm). Do not drill through the cavity into the inner leaf. Use suitable cavity wall fixings stopping at 75mm depth. For more information see our Starlink Pivot Mount Installation.

Last updated: 2026-05-31.

External Resources

For further information consult authority guidelines at the British Standards Institution (BSI).